Southern Kansas City and surrounding suburbs  |  Monday-Friday 8am-6pm, Saturday 9am-2pm, Sunday 11am-3pm

Follow Us :

Tile & Fiberglass Grab Bar Mounting Kansas City

Tile & fiberglass grab bar mounting Kansas City: The bar is the easy part. The wall is the job. Tile cracks, fiberglass flexes, and both punish the wrong technique. Mounting grab bars into hard bathroom surfaces is a specialty, it's most of what we do.

Tile

We drill with diamond core bits and a water-cooled process: clean, round holes with no cracked glaze and no wandering bits. Flanges are set with silicone sealant so no moisture gets behind the tile. Anchoring goes into studs wherever the layout allows; where it doesn't, we use rated tile anchors engineered for the load.

Fiberglass and acrylic surrounds

These are the tricky ones. The surround is thin and flexible, screws alone will pull through. Our approach: reinforced backing plates that spread the load across a wide area, plus rated anchors designed for fiberglass. Where the layout demands maximum strength, we open a small section behind the surround to install wood blocking, then seal it back up. You'd never know we were there.

What we won't do

We won't mount a bar into a surface that can't hold it and call it good. If your wall genuinely can't support a safe installation in the spot you want, we'll tell you, and show you the placement that works.

Text or call 913-600-8183. Tell us your wall surface and we'll explain exactly how we'd mount it.

Get a free quote · All services